-
Release Time:2017/09/12   Browsing Times:39
With the fast development of laser processing technology, traditional heavy cutting equipment has been replaced by laser cutting machines. How can we choose an high-quality and appropriate one among different laser cutting machines on the market.
-
Release Time:2017/09/05   Browsing Times:39
There are three reflectors and one focus lens in a laser engraving machine. Located at the left side of the machine, the first reflector is installed in front of one side of laser tube that emitting laser. The second reflector is set at the left end of the bearing beam. The third reflector is put on the top of the laser head. The focus lens is installed within the lens cone that can be adjusted under the laser head.
-
Release Time:2017/08/29   Browsing Times:39
Several important factors affecting the precision of laser cutting:
The size of the spot after the laser beam is focused: The smaller the laser beam concentration is, the higher the laser cutting accuracy is, especially the incision is smaller, and the minimum spot size is 0.01mm.
-
Release Time:2017/08/24   Browsing Times:39
There is a variety of dislocation problems in the engraving progress of the engraving machine, such as left and right dislocation, up and down dislocation, X axis dislocation, Z axis dislocation, etc., what is the cause of the dislocation problem?
-
Release Time:2017/05/26   Browsing Times:39
Our workers were loading machines into the truck. These machines were packaged in a way that makes sure they can be delivered to our customers safely and perfectly...