What to do if the spindle motor of the engraving machine is rusty

  The spindle motor of many engraving machines will have a variety of problems after a long period of use. Common problems of spindle motor are bearing wear , rusting and so on. Especially the stone engraving machine, because of the production characteristics, stone engraving machine need water to cool the tool when in processing , and the spindle motor is easy to rust because of the water. if maintenance is not timely, after a long time, it will affect the use of the spindle motor, shorten the service life of the motor. So Jinan Jindiao Technology Co.,Ltd reminds customers to do the maintenance work of the spindle motor to prevent its rusting. About the rusted motor we give the following treatment:

   One is the physical derusting method, by hand tapping, shoveling, scraping, brushing, or flexible abrasion to eliminate external rust, dirt. This is also the most commonly used rust removal method which is easy to operate;

   Another is chemical derusting method, for severely rusted main spindle, you can use wd-40 cleaning lubricant and spray evenly on the spindle motor, wipe the rust off with a cotton cloth after half an hour. If it is especially serious, it can be repeatedly sprayed and wiped. This cleaning lubricant also has a protective effect on the spindle .

   Although rust can be removed, the best way is to do daily maintenance work well to avoid rusting of spindle motor, which is conducive to the overall performance stability of engraving machine.